– 16 –
Chapter 2 Description of parts — Power supply and accessory mounting section
16 <LENS> terminal (page 30)
Connect the lens connection cable. For a detailed description of the lens used, refer to the Operating Instructions for the lens.
17 Tripod mount (page 38)
Attach the tripod adaptor SHAN-TM700 (optional) when mounting the camera on the tripod.
18 Lens mount (2/3 type bayonet) (page 30)
Mount the lens.
19 Lens lever (page 30)
After mounting the lens to the lens mount, tighten the lever to secure the lens.
20 Mount cap (page 30)
Raise the lens lever to remove the cap. Replace the cap when the lens is not mounted.
To Next Page
Loading...
