– 19 –
Chapter 2 Description of Parts — Left side
12 <WHITE BAL> switch
Selects the white balance memory
. Data can be recorded to <A> or <B>.
<PRST>: The white balance congured in [MAIN MENU] [PAINT] [COLOR TEMP SETTING] is set.
This switch cannot be used when the CCU or ROP is connected to the camera.
13 <
> mark
Indicates the focal plane of the CMOS sensor.
Use this mark as a reference to accurately measure the focal distance from the subject.
14 Shoulder strap ttings
Used to attach the shoulder strap.
15 Power indicator lamp
Lights up in green when power is supplied to the camera.
ON (green): The camera power is on
ON (red): The camera power is off while the camera is connected to the CCU which is turned on
OFF: The camera power is off with the CCU not connected, or the camera is connected to the CCU which is turned off
Selects the camera power input, or turns off the power.
<CCU>: When the camera is connected to the CCU, this switch turns on the power with the power supplied from the CCU.
<EXT>: When an external DC power supply is connected to the camera, this switch turns on the power with the power supplied from the external DC
power supply.
Center position: Turns off the power.
To Next Page
Loading...
