Panasonic AK-HC3900G - Attaching the Viewfinder

– 25 –
Chapter 3 Preparation — Attaching the viewnder
Attaching the viewnder
Attach the viewnder (optional).
Attaching the viewnder
HD viewnder AJ-CVF50G (optional) can be used with this camera.
For details on handling the HD viewnder, refer to the Operating Instructions of the viewnder.
Fig. 1 Fig. 2
Knob
Viewnder left-right positioning ring
1
Set the <POWER> switch to <OFF>.
2
Pull up the knob on the mounting plate and slide the plate to attach the viewfinder. (Fig. 1)
3
Securely tighten the viewfinder left-right positioning ring. (Fig. 1)
4
Connect the plug to the <VF> terminal. (Fig. 2)
NOTE
 When connecting the plug to the <VF> terminal, conrm that the plug is fully inserted in the terminal.
Removing the viewnder
1
Set the <POWER> switch to <OFF>.
2
Remove the plug from the <VF> terminal.
3
Loosen the viewfinder clamping dial and then pull up the knob on the mounting plate.
4
Slide the viewfinder along the plate to remove it from the plate.