– 26 –
Chapter 3 Preparation — Attaching the viewnder
Attaching the rear viewnder
LCD viewnder AK-HVF100G (optional) can be used with this camera.
For details on handling the LCD viewnder, refer to the Operating Instructions of the viewnder.
Fig. 1 Fig. 2
V-shaped protrusion
Lock release button
V-groove
Connector cover
1
Turn off the power of the camera and the LCD viewfinder.
2
Press the lock release button and remove the connector cover. (Fig. 1)
3
Align the V-shaped protrusion of the LCD viewfinder with the V-shaped groove on the camera and slide it in until the lock is
engaged. (Fig. 2)
NOTE
When attaching the viewnder, refrain from holding the hood of the LCD viewnder.
Removing the rear viewnder
1
Turn off the power of the camera and the LCD viewfinder.
2
While pressing the lock release button, slide off the LCD viewfinder.
NOTE
When removing the viewnder, refrain from holding the hood of the LCD viewnder.