Panasonic AK-HC3900G - When Mounting a Microphone Holder (Optional) for Use

– 31 –
Chapter 3 Preparation — Connecting a microphone
When mounting a microphone holder (optional) for use
Fig. 3
Fig. 1 Fig. 2
Clamping screw
<MIC> terminal (front)
Lock lever
Fig. 4
1
Remove the screws on the microphone holder mounting position and mount the microphone holder AJ-MH800G (optional).
(Fig. 1)
2
Mount the microphone and tighten the clamping screw. (Fig. 2)
3
Loosen the lock lever, adjust the angle of the microphone, and then tighten the lock lever. (Fig. 3)
4
Insert the microphone cable into the cable clamp and connect it to the <MIC> terminal (front). (Fig. 4)
5
Set the <LINE/MIC/48V> selector switch (<FRONT MIC>) to <MIC> or <48V>.