Panasonic AK-HC3900G - Menu List; [Display Setup]

– 38 –
Chapter 4 Menu Operations — Menu list
Menu list
: Can be saved and loaded as a scene le data.
: Can be saved and loaded as a user le data.
: Can be saved and loaded as an operation le data.
: Can be saved and loaded as a reference le data.
[DISPLAY SETUP]
[MARKER]
Item Description of settings
[FOCUS ASSIST SW]
Enables/disables the focus assist.
[OFF], [ON]
 Factory setting: [OFF]
[FOCUS ASSIST MODE] —
Sets whether to cancel the focus assist by the switch or by the duration of time.
[SW], [INSTANT]
 Factory setting: [SW]
[CANCEL TIME]
Sets the duration of time before cancelling the focus assist when [INSTANT] is selected.
[1sec], [3sec], [5sec], [10sec], [20sec]
 Factory setting: [5sec]
[FOCUS ASSIST] — Displays the type of the focus assist.
[IN RED SW]
Enables/disables the IN RED.
[OFF], [ON]
 Factory setting: [OFF]
[IN RED COLOR]
Sets the color for IN RED.
[RED], [GREEN], [BLUE], [WHITE]
 Factory setting: [RED]
[SQUARE SW]
Enables/disables the SQUARE.
[OFF], [ON]
 Factory setting: [OFF]
[SQUARE COLOR]
Sets the color for the SQUARE.
[RED], [GREEN]
 Factory setting: [GREEN]
[BAR SW]
Enables/disables the BAR.
[OFF], [ON]
 Factory setting: [OFF]
[BAR MODE]
Sets the appearance of the focus bar.
[NORMAL], [THICK]
 Factory setting: [NORMAL]
[BAR COLOR]
Sets the color of the bar when [BAR MODE] is set to [THICK].
[WHITE], [RED], [BLUE], [GREEN]
 Factory setting: [WHITE]
[BAR POSITION]
Sets the display position of the bar when [BAR MODE] is set to [THICK].
[UPPER], [UNDER], [RIGHT], [LEFT]
 Factory setting: [UNDER]
[MAG SW]
Enables/disables the magnication display function.
[OFF], [ON]
 Factory setting: [OFF]
[ZEBRA] —
Enables/disables the luminance zebra.
[OFF], [ON]
 Factory setting: [OFF]
[ZEBRA1 LEVEL]
Sets the level of the luminance zebra 1.
[0%]…[109%]
 Factory setting: [80%]
[ZEBRA2 LEVEL]
Sets the level of the luminance zebra 2.
[0%]…[109%]
 Factory setting: [100%]
[ZEBRA PATTERN]
Sets the pattern of the luminance zebra.
[1], [12], [SPOT]
 Factory setting: [1]
[FRAME LEVEL
SWITCH]
—
Shows/hides the level display outside the frame marker.
[OFF], [ON]
 Factory setting: [OFF]
[FRAME LEVEL]
Sets the level to be displayed outside the frame marker.
[0]…[31]
 Factory setting: [31]
[FRAME MARK SWITCH]
Shows/hides the frame marker.
[OFF], [ON]
 Factory setting: [OFF]
[FRAME SIG]
Sets the aspect ratio of the frame marker.
[4:3], [13:9], [14:9], [15:9], [16:9], [CINEMA], [VISTA]
 Factory setting: [4:3]