Panasonic AK-HC3900G - Page 41

– 41 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[RETURN SELECT]
Shows/hides the return ID display.
[OFF], [ON]
 Factory setting: [OFF]
[STATUS]
Shows/hides the display appearing when functions are selected.
[OFF], [ON]
 Factory setting: [OFF]
[STATUS(AUTO)]
Shows/hides the display appearing when AWB/ABB/ASU are activated or deactivated.
[OFF], [ON]
 Factory setting: [OFF]
[SENSOR RATE]
Shows/hides the sensor imaging rate display.
[OFF], [ON]
 Factory setting: [OFF]
[VOLTAGE]
Shows/hides the power supply display.
[OFF], [ON]
 Factory setting: [OFF]
[SYSTEM MODE]
Shows/hides the system frequency/resolution display.
[OFF], [ON]
 Factory setting: [OFF]
[FAN OFF]
Shows/hides the status display when the fan is off.
[OFF], [ON]
 Factory setting: [OFF]
[MONI OUT SIGNAL]
Shows/hides the monitor output signal type display.
[OFF], [ON]
 Factory setting: [OFF]
[COLOR TEMP]
Shows/hides the color temperature display.
[OFF], [ON]
 Factory setting: [OFF]
[FBC]
Shows/hides the ash band compensation display.
[OFF], [ON]
 Factory setting: [OFF]
[SHOOTING MODE]
Shows/hides the sensitivity mode display.
[OFF], [ON]
 Factory setting: [OFF]
[MAG]
Shows/hides the status display when the focus assist magnication display function is enabled.
[OFF], [ON]
 Factory setting: [ON]
[MENU DISP WARNING]
Shows/hides the menu warning display.
[OFF], [ON]
 Factory setting: [ON]
[F DROP ADJUST]
Shows/hides the F drop display.
[OFF], [ON]
 Factory setting: [OFF]
[HDR]
Shows/hides the HDR display.
[OFF], [ON]
 Factory setting: [OFF]
[CHARACTER SIZE]
Selects the character size for display on the viewnder.
[LARGE], [SMALL]
 Factory setting: [SMALL]
[MODE CHECK IND]
Item Description of settings
[AUDIO]
Shows/hides the [AUDIO] screen during the mode check.
[OFF], [ON]
 Factory setting: [ON]
[USER SW STATUS]
Shows/hides the [USER SW STATUS] screen during the mode check.
[OFF], [ON]
 Factory setting: [ON]
[!LED]
Shows/hides the [!LED] screen during the mode check.
[OFF], [ON]
 Factory setting: [ON]
[SDI OUT]
Shows/hides the [SDI OUT] screen during the mode check.
[OFF], [ON]
 Factory setting: [ON]
[CAC]
Shows/hides the [CAC] screen during the mode check.
[OFF], [ON]
 Factory setting: [ON]