Panasonic AK-HC3900G - Page 49

– 49 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[WHITE CLIP]
Enables/disables white clips.
[OFF], [ON]
 Factory setting: [ON]
[DRS SW]
Enables/disables dynamic range stretcher.
[OFF], [ON]
In the UHD mode, [---] is displayed.
 Factory setting: [OFF]
[DETAIL]
Enables/disables the detail.
[OFF], [ON]
 Factory setting: [ON]
[SKIN TONE DETAIL]
Enables/disables the skin tone detail.
[OFF], [ON]
 Factory setting: [OFF]
[MATRIX]
Enables/disables matrix (linear matrix/12-axis color correction).
[OFF], [ON]
 Factory setting: [OFF]
[LINEAR MATRIX]
Enables/disables linear matrix.
[OFF], [ON]
 Factory setting: [OFF]
[COLOR CORRECT]
Enables/disables 12-axis color correction.
[OFF], [ON]
 Factory setting: [OFF]
[PEDESTAL]
Item Description of settings
[MASTER PEDESTAL]
Adjusts the black level of the master pedestal.
[99]…[99]
 Factory setting: [0]
[R PEDESTAL]
Sets the correction level of red to the master pedestal.
[800]…[800]
 Factory setting: [0]
[G PEDESTAL]
Sets the correction level of green to the master pedestal.
[800]…[800]
 Factory setting: [0]
[B PEDESTAL]
Sets the correction level of blue to the master pedestal.
[800]…[800]
 Factory setting: [0]
[PEDESTAL OFFSET]
Sets whether to maintain the Rch, Gch, and Bch pedestal levels after adjusting the automatic black
balance.
[ON]: Maintains the values set in [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL].
[OFF]: Sets [R PEDESTAL], [G PEDESTAL], and [B PEDESTAL] to [0].
 Factory setting: [OFF]
[MASTER PEDESTAL RANGE]
Sets the variable amount of the master pedestal.
[NORMAL]: Current variable amount
[WIDE]: Double of current variable amount
 Factory setting: [NORMAL]
[CHROMA]
Item Description of settings
[CHROMA LEVEL SWITCH]
Enables/disables the gain adjustment of chroma.
[OFF], [ON]
 Factory setting: [OFF]
[CHROMA LEVEL]
Sets the gain adjustment of chroma.
[100%]…[40%]
 Factory setting: [0%]