– 62 –
Chapter 4 Menu Operations — Menu list
[FILE]
[SD CARD]
[SD CARD] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item Description of settings
[MODE] Selects the operation mode.
[FORMAT], [LOAD], [STORE]
Factory setting: [LOAD]
[FILE SEL] Selects a le.
[ALL], [ALL SCENE], [ALL USER], [ALL LENS], [SCENE], [USER], [LENS], [OPERATION]
Factory setting: [SCENE]
[FILE NO.] Selects a le number.
[CURRENT], [1]…[8] (Scene le)
[1]…[3] (User le)
[1]…[32] (Lens le)
[CURRENT] (Operation le)
Factory setting: [1]
[FILE NAME] Enters a le name. (15 characters or less)
Factory setting: [SCENE1]
[SD FILE NO.] Selects the le number of the SD memory card.
[1]…[100]
Factory setting: [1]
[EXECUTE] Selects whether to execute with the congured settings.
[NO], [YES]
[SCENE FILE]
Item Description of settings
[MODE] Selects the operation mode.
[LOAD], [STORE]
Factory setting: [LOAD]
[FILE NO.] Selects a le.
When [MODE] is set to [LOAD]:
[OFF], [1]…[8]
Factory setting: [OFF]
When [MODE] is set to [STORE]:
[1]…[8]
Factory setting: [1]
[FILE NAME] Enters a le name. (15 characters or less)
Factory setting: [SCENE1]
[EXECUTE] Selects whether to execute with the congured settings.
[NO], [YES]
[USER FILE]
Item Description of settings
[MODE] Selects the operation mode.
[LOAD], [STORE]
Factory setting: [LOAD]
[FILE NO.] Selects a le.
[1], [2], [3]
Factory setting: [1]
[FILE NAME] Enters a le name. (15 characters or less)
Factory setting: [USER1]
[EXECUTE] Selects whether to execute with the congured settings.
[NO], [YES]
[REFERENCE FILE]
Item Description of settings
[MODE] Selects the operation mode.
[LOAD], [STORE]
Factory setting: [LOAD]
[FILE NO.] Selects a le.
[1], [2], [3]
Factory setting: [1]
[FILE NAME] Enters a le name. (15 characters or less)
Factory setting: [REFERENCE1]
[EXECUTE] Selects whether to execute with the congured settings.
[NO], [YES]
To Next Page
Loading...
