– 66 –
Chapter 4 Menu Operations — Menu list
[UPDATE]
[UPDATE] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Description of settings
Updates the software.
Execute the update of the software with the update image le stored in the SD memory card.
The busy lamp (next to the SD memory card slot) and the back tally lamp ash during the update of software is executing.
[YES], [NO]
Factory setting: [NO]
[DIAGNOSTIC]
[VERSION]
Item Description of settings
[VERSION] Displays the SYSTEM version of the camera.
[CAM FPGA] Displays the version of the CAMERA FPGA.
[AVIO FPGA] Displays the version of AVIO FPGA.
[CPU FPGA] Displays the version of the CPU FPGA.
[CAM MAIN] Displays the version of the CAM MAIN.
[HOUR METER]
Item Description of settings
[HEAD] Display the operating time of the camera head.
[0000000]…[1193046]
[FAN] Displays the operating time of the fan.
[0000000]…[1193046]
To Next Page
Loading...
