Panasonic AK-HC3900G - Warning Displays; Camera Warning Displays; Other Warning Displays

– 72 –
Chapter 6 Maintenance — Warning displays
Warning displays
Warning displays appear when errors have occurred in camera’s auto functions.
Camera warning displays
 When AWB (automatic white balance) is executed
[AWB BREAK] Automatic white balance has been interrupted.
[AWB HIGH LIGHT NG] Automatic white balance cannot be executed because the light amount is excessive.
Set the light amount to an appropriate level.
[AWB LOW LIGHT NG] Automatic white balance cannot be executed because the light amount is insufcient.
Set the light amount to an appropriate level.
[AWB NG CHECK FILTER] Automatic white balance cannot be executed because of erroneous lter position.
Set the correct lter position.
[AWB RCH OUT RANGE] The white balance convergence for red cannot be achieved.
Shoot a uniformly white object on the screen, and execute AWB.
[AWB BCH OUT RANGE] The white balance convergence for blue cannot be achieved.
Shoot a uniformly white object on the screen, and execute AWB.
 When ABB (automatic black balance) is executed
[ABB BREAK] Automatic black balance has been interrupted.
[ABB RCH OUT RANGE] The black balance convergence for red cannot be achieved.
Check if there are any errors in the image.
[ABB BCH OUT RANGE] The black balance convergence for blue cannot be achieved.
Check if there are any errors in the image.
[ABB GCH OUT RANGE] The black balance convergence for green cannot be achieved.
Check if there are any errors in the image.
[ABB NG] The lens iris may not be closed.
 Executing black shading
[BSHD] Black shading is executing.
[BSHD BRAK] Black shading has been interrupted.
[BSHD NG] An error has occurred with the black shading.
Check if the lens is correctly closed.
Other warning displays
[FAN OFF] Fan has stopped.
[UPDATE ERROR!]
[ERRCODE:01]
The version update le is invalid.
Store the correct version update le in the SD memory card, and the execute the update again.
[UPDATE ERROR!]
[ERRCODE:02]
The version update le does not exist.
Store the correct version update le in the SD memory card, and the execute the update again.
[UPDATE ERROR!]
[ERRCODE:03]
Mounting error of the SD memory card.
The SD memory card may not be inserted, or the SD memory card may be damaged.
[UPDATE ERROR!]
[ERRCODE:04]
File load error.
The SD memory card may be ejected during the version update, or the version update le in the SD memory card may
be corrupted.
[UPDATE ERROR!]
[ERRCODE:05]
An error has occurred during the ROM erase for overwriting the version update le.
Consult the dealer.
[UPDATE ERROR!]
[ERRCODE:06]
An error has occurred during the ROM write for overwriting the version update le.
Consult the dealer.
[UPDATE ERROR!]
[ERRCODE:07]
The version update le is invalid.
Store the correct version update le in the SD memory card, and the execute the update again.
[UPDATE ERROR!]
[ERRCODE:08]
Other system error. (Communication error, etc.)
Consult the dealer.
[TEMP OVER!]
[FORCE POWER OFF!!]
The internal temperature is high.
The power is turned off forcefully.
Operate the fan when set to [MAIN MENU]  [MAINTENANCE]  [FAN SETTING]  [FAN]  [FAN MODE]  [OFF].