Panasonic AQUAREA WH-ADC0912K6E5AN - To Remove Remote Control; To Remove RCCB

239
19.2 To Remove Remote Control
1. Remove the top case from the bottom case. 2. Disconnect the Remote Controller wiring.
3. Remove 2 screws then take out the bottom case.
Claw
(3 places)
Disconnect the
Remote controller
wiring
Slide it
downwards
to unhook
Top case
Insert the
driver and
slightly turn.
Flat-blade
screwdriver
Bottom
case
19.3 To Remove RCCB
1. Remove 2 screws to swing
the Control Board Cover.
3. Remove screws and
bracket to remove
the RCCB.
2. Disconnect lead wires
(Brown and Blue)
from RCCB.