200 Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Appendix
8
8 Appendix
8.1 Extract from the operating instructions (J Generation)
!
IMPORTANT
As it is not possible to cover the operating instructions for all models within the scope of this
manual, only the operation instructions for bi-bloc systems with All in One unit of the J generation
are given as an extract from the manual on the following pages to serve as an example.
However, not all functions stated here will be available for all models. Therefore, in order to be
sure about the valid functions of each model, it is absolutely mandatory to refer to the operating
instructions or service manual for the relevant model when operating the device.
Remote Controller buttons and display
Buttons / Indicator
1
Quick Menu button
(For more details, refer to the separate
Quick Menu Guide�)
2
Back button
Returns to the previous screen
3 LCD Display
4
Main Menu button
For function setup
5
ON/OFF button
Starts/Stops operation
6
Operation indicator
Illuminates during operation, blinks during
alarm�
Press centre
No glove
No pen
2
1
4
5
6
3
Cross key buttons
Selects an item�
Enter button
Fixes the selected content�
Up
Down
Left Right
Safety precautions / Remote Controller buttons and display
16.02.2022, cH
As the Operating Instructions for J Gen. models
were not available as InDesign files, we had to use
the following workaround: I have included the
contents from the Operating Instructions manual
as extracted PDF files/pages, that means, it is un-
editable/non-translatable contents (like a picture).
When the document gets translated into other lan-
guages, we have to pass on this informtion so that
the translators can include the relevant PDF pages
in their own languages.
To Next Page
Loading...
