Panasonic AU-EVA1 - Page 77

– 77 –
Chapter 4 Operation — Menu setting contents
[USER7]
Sets if the <USER 7> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[THUMBNAIL]
Sets if the <THUMBNAIL> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[HOME]
Sets if the <HOME> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[ND FILTER]
Sets if the <ND FILTER> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[IRIS DIAL]
Sets if the <IRIS> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[MENU]
Sets if the <MENU> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[EXIT]
Sets if the <EXIT> button is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[MULTI DIAL]
Sets if the multidial is to be locked or not with the <LOCK> switch.
[LOCK] It will be locked.
[UNLOCK] It will not be locked.
(Factory setting: [LOCK])
[LED & FAN]
[TALLY LED]
Sets if the tally lamp is to illuminate or not.
[FRONT] The front tally lamp will illuminate.
[REAR] The rear tally lamp will illuminate.
[BOTH] Both the front and rear tally lamps will illuminate.
[OFF] The tally lamp will not illuminate.
(Factory setting: [BOTH])