Panasonic AW-HE20KP - Page 23

23
5
6
7
8
9
10
11
12
13
14
15
16
9. Anti-theft wire mounting hole
Use this hole to attach the wire bracket
(commercially available).
10. Audio input connector [AUDIO IN]
Inputs external audio (microphone, line).
11. Service Switch
 Default: a full reset
The unit is in its default mode.
 Initialization 1:
Reset the user authentication settings for network
connection. (This will delete all the registered user
information (IDs/passwords).
After configuring the SERVICE switch in the
manner of the following illustration, power on
the unit.
[Note]:
1. Once Initialization 1 is configured properly, the
unit’s status indicator LED blinks green.
2. Restore the SERVICE switch to its previous
setting. (Both SW1 and SW2 are set to OFF.)
3. Restart the unit to fully accomplish the setting of
Initialization 1.
 Initialization 2
Initialization 2 restores the unit to its factory
default, including the setting of the menu, and the
Network Configuration. After configuring the
SERVICE switch in the manner of the following
illustration, power on the unit.
[Note]:
1. Once Initialization 2 is configured properly, the
unit’s status indicator LED in front of the unit
blinks green.
2. Restore the SERVICE switch to its previous
setting. (Both SW1 and SW2 are set to OFF.)
3. Restart the unit to fully accomplish the setting of
Initialization 2.