35
Basic Shooting Operation
With the basic operations, it is assumed that the white balance will be adjusted automatically (as per the factory
settings).
1.
Make sure the subject brightness is in the appropriate level.
2.
Make sure the unit and all devices are well connected and power on.
3.
Press one of the [CAMERA 1] to [CAMERA 4] buttons on the wireless remote control to select the unit if using the
wireless remote control. Even when using only one unit, it must still be selected from the wireless remote control or
controller.
4.
Select the scene (shooting) mode.
One of the three shooting modes (Full Auto, Scene1, Scene2)ā whichever one will best suit the shooting
conditions ā can be selected.
The shooting modes are set by the user.
For details of the factory settings, refer to pages 66 to 68.
Select the mode that satisfies the shooting conditions and suits your preferences.
When continuing to shoot in the same circumstances, there is no need to select another mode.
5.
Start shooting.
[Note]
Due to the characteristics of the lens, the edge of the image is distorted.
If using a controller, please upgra7de the unit with the latest firmware version.
To Next Page
Loading...
