17
Main unit mounting screw
(M4 screw)
Note
Do not do this work while holding the camera head since doing so may result in malfunctioning
of the unit.
Check that the unit has been mounted securely with no tilting or wobbling.
The unit must be secured without fail using the main unit mounting screw before any the cables
are connected.
5. Cable fixing bracket
Install the cable fixing bracket included in the ceiling mount package and you can better manage the
power cable with a cable tie.
Screw in the cable fixing bracket with the supplied screw for cable fixing bracket (M2.6) on the
back panel of AW-HE20. Clamping torque: 0.39 Nm (4 kgf.cm)]
Slide a cable tie through the openings on the cable fixing bracket.
To Next Page
Loading...
