102
Common
Click [Set] button to save the configuration
HTTP PORT
Port numbers are allocated separately.
Setting range: 1 to 65535
Factory settings: 80
Easy IP Setup accommodate period
[20min, Unlimited]
Select [20min] or [Unlimited] as the time for enabling the operation of the network settings from the Easy IP Setup
Software.
20 mins
The setting operations from the Easy IP Setup Software are enabled for 20 minutes after the
camera has started operating.
Unlimited The setting operations from the Easy IP Setup Software are enabled at all times.
Factory settings: Unlimited
[Note]
The camera screen can be opened because the camera display in the Easy IP Setup Software is constantly
enabled.
For details on the address settings of each server, consult your network administrator.
The port forwarding function converts a global IP address to a private IP address, and includes “static IP
masquerade” and “network address translation (NAT)”. This function is set to the router.
To access the camera via the Internet after connecting it to a router, it will be necessary to set an individual HTTP
port No. for each network camera and to convert the address using the router’s port forwarding function. For details,
refer to the operating instructions for the router.
WAN global address
vvv.xxx.yyy.zzz
Enter "<global address from
Internet>:<port number>" as
URL in web browser
vvv.xxx.yyy.zzz:50000
vvv.xxx.yyy.zzz:50001
Internet
(WAN)
Cable
modem/
XDSL
modem
LAN private address
192.168.0.254
Address exchange via port forwarding
vvv.xxx.yyy.zzz:50000
→192.168.0.254:50000
Address exchange via port forwarding
vvv.xxx.yyy.zzz:50001
→192.168.0.254:50001
Private address
192.168.0.2
Port number: 50000
Private address
192.168.0.1
Port number: 50001
To Next Page
Loading...
