48
Menu Items
Setting the menu items
When the unit’s settings are to be selected, the camera menus are displayed on the monitor.
The monitor is connected to the video signal output connector.
The basic camera menu operations involve displaying sub-menus from the Top Menu items, and selecting settings on
the sub-menus.
Some sub-menus have menu items for performing more detailed settings.
Main Menu Screen
Camera
Select this to open the camera menu relating to the camera images.
System
Displays the System menu in which the camera’s output image settings are configured.
Maintenance
Displays the Maintenance menu which concerns checking the unit’s firmware versions, checking the IP address and
initialize the settings.
[Note]
The main Menu does not have a “Return” setting.
Camera Menu
This menu is for the camera image settings. The functions will be varied by selected “scene” mode (Full Auto, Scene1,
and Scene2).
To Next Page
Loading...
