57
Install Position
[Desktop, Hanging]
“Desktop” or “Hanging” is selected here as the method used to
install the unit.
When “Hanging” has been selected, the top, bottom, left and right
of the images will be reversed and up/down/left/right control for
panning and tilting will also be reversed.
Factory settings: Desktop
Preset Speed Table
[Slow, Fast]
Set the preset speed table (Slow, Fast).
During preset playback, preset actions are performed at Preset
Speed (1 to 30) values that are based on the table set here.
Factory settings: Fast
Preset Speed
[1~30]
Set the pan/tilt operation speed in 30 steps when playing back
the preset memory.
Factory settings: 14
[Note]
If a high value is selected for the Preset Speed setting, the image
on the screen may shake when operation stops.
Also, if high value is selected for the Preset Speed setting, the
pan/tilt operation sound will be louder.
Preset Scope
[Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when the
contents of the preset memory are regenerated.
Mode A
Pan, Tilt, Zoom (including digital zoom), Focus,
Iris, Gain, White Balance
Mode B Pan, Tilt, Zoom (including digital zoom), Focus,
Pan, Tilt, Zoom (including digital zoom), Focus
Factory settings: Mode A
To Next Page
Loading...
