Panasonic AW-HE20WP - Audio; Input Type; Volume Level; Plugin Power

61
Audio
[Off, On]
Enable/disable the audio input signal from the device connected
to the audio input connector.
Factory settings: Off
Input Type
[Mic, Line]
Select an Input Type.
Mic
Set the microphone input.
Line
Set the line input.
Factory settings: Line
This is only enabled when [Audio] is set to [On].
Volume Level
[–36 dB ～ +12 dB]
Set the volume of audio output.
This is only enabled when [Audio] is set to [On].
Factory settings: 0dB
Plugin Power
[Off, On]
Turn the plugin power for the audio off/on.
This is only enabled when [Audio] is set to [On].
This is only enabled when [Input Type] is set to [Mic].
Factory settings: Off
Serial Com. Protocol
[Panasonic, Standard]
Set the serial communication protocol for the RS422 terminal.
You can select either Panasonic or Standard.
Factory settings: Panasonic