Installation Instructions
System example 5 (Fiber)
Fiber/12G SDI converter
12G SDI monitor
AW-UE160
SFP+ connector
External DC
power supply
• Use an SFP+ optical transceiver whose operation is guaranteed. For details, visit the Panasonic website.
System example 6 (SMPTE ST2110)
LAN connector
AW-UE160
AW-UE160
SFP+ connector
3G SDI OUT2/PM
RETURN signal
Fiber cable
Kiros Core
(Main Frame)
3G SDI monitor
External DC
power supply
External DC
power supply
Remote Camera Controller
AW-RP150
LAN cable
LAN cable
Switching hub
Network switch
Fiber cable
• Use an SFP+ optical transceiver whose operation is guaranteed. For details, visit the Panasonic website.
• A separate optional software key (AW‑SFU60) needs to be purchased to enable SMPTE ST2110 functionality.
Use EasyIP Setup Tool Plus to activate AW‑SFU60. Refer to the operating instructions available on the EasyIP Setup Tool Plus download page for
activation instructions.
22
Connections (continued)
To Next Page
Loading...
