49
Scene
There are three scene modes – Full Auto, Scene 1, and Scene 2.
Full Auto: In this mode, for menu items under
[Brightness], the optimum settings and
adjustments for the shooting conditions at hand
are automatically established. But user still can
adjust the value of Picture Level, AGC MaxGain,
and Slow Shutter.
Scene1 and Scene2: One of two shooting
modes (Scene1 and Scene2)—whichever one
will best suit the shooting conditions—can be
selected. The shooting modes are set by the
user.
Factory settings: Full Auto
For details of the factory setting, refer to pages 66 to
Picture Level
[-4~4]
Adjust the brightness level.
Factory settings: 0
AGC MaxGain
[24dB, 30dB, 36dB, 42dB]
If you select CAMERA < Scene < Full Auto, you can set up the
maximum gain-up amount value.
If you select CAMERA < Scene < Scene1/Scene2, when
“Auto” is selected as the “Gain” setting, the maximum gain-up
amount can be set as (24 dB, 30 dB, 36 dB, 42 dB).
Factory settings: 24 dB.
To Next Page
Loading...
