54
System Menu
The following will describe the each function in System menu.
Priority Mode
Configure the setting for the priority output of video.
HDMI (4K): 4K video is output to an external monitor
connected via an HDMI cable.
USB (4K): Enables the unit to be used as a 4K Web
camera. The camera can also be controlled from a personal
computer.
IP (4K): Enables IP image transmission. IP image
transmission of 4K images uses the H.264/H.265 video
coding format. This unit cannot display H.264/H.265 format
images on the Live screen. To display H.264/H.265 images,
use an external device or external software that supports
H.264/H.265 images.
HDMI/USB: HD format video is output to an external monitor
connected via an HDMI/SDI cable. Enables the unit to be
used as a Web camera. The camera can also be controlled
from a personal computer.
IP: HD format video is output to an external monitor
connected via an HDMI/SDI cable. Enables IP image
transmission. The IP transmission of H.264/H.265 images is
also supported. This unit cannot display H.264/H.265 format
images on the Live screen. To display H.264/H.265 images,
use an external device or external software that supports
H.264/H.265 images.
USB (Video Conference): Enables the unit to be used as a
Web camera. Specially tuned for online meetings, the unit
automatically goes into the Standby mode when an online
meeting comes to an end; if an online meeting starts while
the unit is in the Standby on mode, the unit automatically
switches into the Power ON mode.
Factory settings: HDMI/USB
To Next Page
Loading...
