58
Speed with Zoom Position
[Off, On]
When [On] is set, if you adjust the zoom in the “Tele” direction,
the panning and tilting operations will become slower than usual.
This function has no effect during preset operations.
Factory settings: On
Focus Mode
[Manual, Auto]
“Auto” or “Manual” is set here for the focusing function.
Auto: The subjects are always brought into focus automatically.
Manual: The focus is operated manually.
Factory settings: Auto
Focus Adjust With PTZ
[Off, On]
“Off” or “On” is set here for the function which compensates for
out-of-focusing when it occurs during panning, tilting or zooming
operations at the manual focus setting.
This item can be selected only when “Manual” has been selected
as the “Focus Mode” setting.
Factory settings: Off
Zoom Mode
[Opt.Zoom, i.Zoom, D.Zoom]
Select a zoom mode.
Opt.Zoom Use only the optical zoom. Up to 12× optical
i.Zoom Enabling this function allows you to perform
electronic zoom while reducing drops in picture
quality.
Combining optical zoom and electronic zoom, up
to 15.96× zoom is possible.
D.Zoom: Enable the digital zoom function.
Picture quality degrades as zoom increases with
Factory settings: Opt.Zoom
To Next Page
Loading...
