Panasonic AW-UE20KP - Audio Input;Output Settings; Input Type, Volume, Plugin Power; Protocol and Connector Selection

61
Input Type
[Mic, Line]
Select an Input Type.
Mic
Set the microphone input.
Line
Set the line input.
Factory settings: Line
This is only enabled when [Audio] is set to [On].
Volume Level
[–36 dB ～ +12 dB]
Set the volume of audio output.
This is only enabled when [Audio] is set to [On].
Factory settings: 0dB
Plugin Power
[Off, On]
Turn the plugin power for the audio off/on.
This is only enabled when [Audio] is set to [On].
This is only enabled when [Input Type] is set to [Mic].
Factory settings: Off
Serial Com. Protocol
[Panasonic, Standard]
Set the serial communication protocol for the RS422 terminal.
You can select either Panasonic or Standard.
Factory settings: Panasonic
Connector Select
[RS422, RS232C]
You can select either RS422 or RS232C.
Factory settings: RS422
This is only enabled when [Serial Com. Protocol] is set to
[Standard].