85
Slow Shutter
[Off, On]
Set slow shutter function to “Off” or “On”.
■When Slow Shutter is set to On
[50 Hz]
1/1, 1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/16000
[59.94 Hz/60 Hz]
1/1, 1/2, 1/3, 1/7, 1/15, 1/30, 1/60, 1/120, 1/240, 1/480, 1/1000, 1/2000, 1/4000, 1/8000, 1/16000
■When Slow Shutter is set to Off
[50 Hz]
1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/16000
[59.94 Hz/60 Hz]
1/60, 1/120, 1/240, 1/480, 1/1000, 1/2000, 1/4000, 1/8000, 1/16000
Factory settings: Off
This can only be configured when “Scene” is set to “Full Auto.”
Gain
[Auto, 0 dB, 3 dB, 6 dB, 12 dB, 15 dB, 18 dB, 21 dB, 24 dB, 27 dB, 30 dB, 33 dB, 36 dB, 39 dB, 42 dB]
In locations which are too dark, adjust the gain upward; conversely, in locations which are too bright, adjust it
downward.
When “Full Auto” mode is set, the light quantity is adjusted automatically.
The noise increases when the gain is increased.
AGC Max Gain
[24 dB, 30 dB, 36 dB, 42 dB]
Set up the maximum gain-up amount value.
Factory settings: 24 dB
Frame Mix
[Auto, Off, 6 dB, 12 dB, 18 dB, 24 dB]
Select for frame addition (gain-up using sensor storage) amount. When frame addition is performed, it will appear as if
the images are missing some frames.
Factory settings: Off
[Note] Under discharge tube illumination, such as fluorescent and mercury-vapor lights, the brightness may change
cyclically, colors may change, and horizontal stripes may flow up and down the image.
Auto F.Mix Max Gain
[0 dB, 6 dB, 12 dB, 18 dB]
Sets the maximum amount of frames that can be added when [Frame Mix] is running in [Auto] mode.
When frame addition is performed in [Auto] mode, it will appear as if the images are missing some frames.
Factory settings: 0
Chroma Level
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
Set the color intensity (Chroma level) of the images. Move the scroll bar to adjust the value.
To Next Page
Loading...
