Panasonic AW-UE4 Series - Image Enhancement Features; Contrast and Detail Settings; Dynamic Range and Noise Reduction; Backlight and Distortion Correction

39
Contrast
Adjust the contrast level (0, 1, 2, 3, 4) of the image.
DRS
Set here is the DRS function which provides just the right amount
of compensation when images with significant light/dark
differences are displayed.
Depending on the shooting conditions, however, the picture
quality may drop with increased noise.
Back Light COMP
Set backlight compensation function to “On” or “Off”.
Under backlight conditions, the function prevents darkening as a
result of light striking the backs of subjects, and makes it possible
to shoot images in shade or shadow more brightly.
DNR
Set the level of the digital noise reduction effect so that light,
noise-free and clear images will be output even at night and in
other low-brightness environments.
When “Low” or “High” is selected, noise can be eliminated.
However, there is an increased possibility that afterimages may
occur.
LDC
Set LDC(Lens Distortion Correction) function to “On” or “Off”.
[Note]
When you set the LDC setting to "On", the bent line at the edge
of the image turns to a straight line, but the area is stretched.