Panasonic AW-UE4 Series - Camera Configuration Options; Mirror Image Setting; Digital Zoom Functionality; Tally Lamp Control

43
Mirror
Set the mirror the image to On or Off.
Digital Zoom
Set the digital zoom to “On” or “Off”. Picture quality degrades as
zoom increases with digital zoom.
Tally
“Enable” or “Disable” is set here for the function which turns on or
turns off the tally lamp using the tally control signal.
IR ID
Configure the unit’s remote control ID. The settings for this item
correspond to the [CAM1] to [CAM4] buttons on the wireless
remote control.