60
Detail
Adjust the sharpness (0, 1, 2, 3) of the image. Move the scroll bar to adjust the value.
The default is 2.
Contrast
Adjust the Contrast level (0,1,2,3,4).
The default is 2.
DRS
Set here is the DRS function which provides just the right amount of compensation when images with significant
light/dark differences are displayed.
Depending on the shooting conditions, however, the picture quality may drop with increased noise.
The default is off.
Back Light COMP
Set backlight compensation function to “On” or “Off”.
Under backlight conditions, the function prevents darkening as a result of light striking the backs of subjects, and
makes it possible to shoot images in shade or shadow more brightly.
The default is off.
DNR
Set the level of the digital noise reduction effect so that light, noise-free and clear images will be output even at
night and in other low-brightness environments.
When “Low” or “High” is selected, noise can be eliminated. However, there is an increased possibility that
afterimages may occur.
The default is low.
To Next Page
Loading...
