61
Preset Position
Click [Setup] button to call out preset position dialog.
Click [Close] button to exit from image adjust dialog.
Select the preset number or home position from drop-down list.
Click [Move] to go to the pre-set position.
Using to adjust the unit position and click [Set] to register the
preset position.
To adjust the image in the horizontal or vertical direction (panning or tilting),
left-click the pad and the buttons.
It is possible to operate with the central grid pattern in the dragged state, with
the speed of the pan/tilt increasing as it approaches the outside of the pad.
: Use this to adjust the zoom (magnification) to 1.0x
: Use this to adjust the zoom (magnification) in the “Tele” direction.
: Use this to adjust the zoom (magnification) in the “Wide” direction.
Select the speed at which zoom operations are to be performed.
To Next Page
Loading...
