63
Frequency
Set the frame frequency – 50Hz, 59.94Hz, or 60Hz.
When the frequency is switched, “Format” is set as following:
2160/25p
1080/50p
1080/25p
720/50p
2160/29.97p
1080/59.94p
1080/29.97p
720/59.94p
2160/30p
1080/60p
1080/30p
720/60p
Others
Click [Set] button to save the configuration
Install Position
“Desktop” or “Hanging” is selected here as the method used to install the unit.
When “Hanging” has been selected, the top, bottom, left and right of the images will be reversed and
up/down/left/right control for panning and tilting will also be reversed.
The default is desktop.
Mirror
Set the mirror the image to On or Off. The default is off.
Digital Zoom
Set the digital zoom to “On” or “Off”. Picture quality degrades as zoom increases with digital zoom.
The default is off.
Tally
“Enable” or “Disable” is set here for the function which turns on or turns off the tally lamp using the tally control
signal. The default is disabled.
OSD off with Tally
“Off” or “On” the function that turns off menu, status, and other displays when red tally signals are received via
commands or contacts. The default is off.
When the red tally signal releases, the menu display will return
To Next Page
Loading...
