Panasonic AW-UE4 Series - Display and Audio Settings; OSD Status and Color Bar; Microphone and IR Control

64
OSD Status
Turn the status display during preset operation, or error display when an error occurs.
The default is off.
Color Bar
Switch between camera images and color bars. The default is camera.
[Note]
Only HDMI can output color bar.
IP and USB cannot output color bar.
Mic
Turn audio input off/on. The default is on.
IR ID
Configure the unit’s remote control ID. The settings for this item correspond to the [CAM1] to [CAM4] buttons on the
wireless remote control. The default is 1.
Value: 1, 2, 3, 4
IR Control
Turn IR control to on/off. The default is on.