1. Lens
2. Camera head
3. Internal microphone
4. Power status indicator
- Orange light: Standby mode
- Green light: The unit is turned on
- Flashing green light: The unit is receiving a
wireless remote control signal with a matching
remote control ID
- Flashing orange light: The unit is receiving a
wireless remote control signal with a different
remote control ID
- Flash red light: Firmware updating
- Red light: Firmware update failure or other
abnormal.
5. Tally status indicator
6. Wireless remote control signal light-sensing area
7. LAN indicator(LINK/ACT)
Lights up when data is transmitted/received via LAN.
8. LAN connector
Use a category 5e or above LAN cable with a
maximum length of 100 m (328 ft.)
9. HDMI terminal
10. USB terminal
[ ]
Power can be supplied from any device that
complies with USB battery charging standards.
Always use a USB cable is included in accessories.
11. Screw hole for USB cable
To Next Page
Loading...
