ATW Speed [Slow, Normal, Fast]
Set the control speed of the ATW function.
Slow Tracks at a speed slower than [Normal].
Normal Tracks at normal speed.
Fast Tracks at a speed faster than [Normal].
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings: Normal
ATW Target R [–10 to +10]
Make fine adjustments to the Rch output when converging with the
auto tracking white balance operation.
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings: 0
ATW Target B [–10 to +10]
Make fine adjustments to the Bch output when converging with the
auto tracking white balance operation.
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings: 0
Chroma Level [Off, –99% to 99%]
Set here the color intensity (chroma level) of the images.
Factory settings: 0%
Chroma Phase [–31 to +31]
Make fine adjustments to the hue of the colors in the images.
Factory settings: 0
ABB
When the [Execute] button is clicked, automatic black balance (ABB)
is executed and the black balance is reset.
Master Pedestal [–200 to +200]
This item is used to adjust the black level (adjust the pedestal).
These parts become darker when a negative setting is selected and,
conversely, lighter when a positive setting is selected.
Factory settings: 0
Detail [Off, On]
Turn on/off the contour (sharpness of images) adjustment of images.
Factory settings: On
Master Detail [–31 to +31]
Adjust the contour correction level (master).
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Detail Coring [0 to 60]
Set the level of the signal (including noise) which makes the detail
effect not work.
This is only enabled when [Detail] is set to [On].
Factory settings: 15
V Detail Level [–7 to +7]
Adjust the contour correction level in the vertical direction.
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Skin Detail [Off, On]
This function smooths skin and produces a more beautiful image.
This is only enabled when [Detail] is set to [On].
Factory settings: Off
Skin Detail Effect [0 to 31]
The skin of human subjects appears smoother the larger the setting
value.
This is only enabled when [Detail] is set to [On] and [Skin Detail] is set
to [On].
Factory settings: 16
Gamma Mode
[Normal, HD, Cinema1, Cinema2, Still Like]
Select the type of gamma curve.
Normal Standard gamma characteristic.
HD HD (High Definition) video gamma characteristic.
Cinema1 High contrast gamma characteristic.
Cinema2 Sedate gamma characteristic.
Still Like Sets the gamma characteristics for a digital still
camera image tone.
Factory settings: Normal
Gamma [0.30 to 0.75]
Adjust the gamma correction level.
Specifying smaller values results in a gentler gamma curve for the
slope of low-brightness areas and sharper contrast.
Specifying larger values results in an expanded gradient for dark
areas and produces brighter images. The gamma curve for low-
brightness areas will be steeper, and contrast will be softer.
Factory settings: 0.45
DRS [Off, Low, Mid, High]
Set the DRS function which performs correction when video with high
light/dark contrast is displayed.
You can select from a [Low], [Mid], or [High] effect level.
Factory settings: Off
Knee Mode [Off, Auto, Low, Mid, High]
Set the operating mode for gradation compression (knee).
Off Turn the knee function off.
Auto Enable the knee function, and set the knee point and knee
slope automatically.
Low, Mid,
High
Enable the knee function, and manually set the knee point
and knee slope in three steps.
Factory settings: Auto
<NOTE>
• When [DRS] is enabled, the knee setting is disabled.
White Clip [Off, On]
Turn the white clip function off/on.
Factory settings: On
White Clip Level [90% to 109%]
Set the white clip level.
This is only enabled when [White Clip] is set to [On].
Factory settings: 109%
<NOTE>
• When [Knee Mode] is set to [Auto] and the value of [White Clip
Level] is changed, the knee value will also change.
102
Web screen configurations (continued)
To Next Page
Loading...
