Digital Extender [Off, ×1.4, ×2.0]
Make settings for the digital extender function.
Off Turn the digital extender function off.
×1.4 The digital zoom will be fixed at 1.4×.
×2.0 The digital zoom will be fixed at 2.0×.
This is only enabled when [Zoom Mode] is set to [Opt.Zoom].
Factory settings: Off
O.I.S. Mode [Off, O.I.S.]
Sets the mode for optical image stabilization (O.I.S.).
Off Turns the optical image stabilization (O.I.S.) function Off.
O.I.S. Turns the optical image stabilization (O.I.S.) function On.
Factory settings: Off
<NOTE>
• In [O.I.S.] mode, the optical image stabilization (O.I.S.) function’s
level of correction is reduced during pan/tilt operations in order to
minimize the convergence resulting from image stabilization during
pan/tilt operations.
Preset position screen [Preset position]
104 105
Web screen configurations (continued)
To Next Page
Loading...
