Panasonic AW-UE50WP - System Frequency and USB Settings; USB Configuration Options; Changing the System Frequency

USB
Make settings related to USB Video Class/USB Audio Class.
USB Mode [Off, On]
Sets the USB mode.
When set to [On], it is possible to transmit USB Video Class/USB
Audio Class.
<NOTE>
• It is linked to [Streaming mode] in the web screen, and when set
to [On], [Streaming mode] becomes [USB], and when set to [Off],
[Streaming mode] becomes [H.264].
• When [Frequency] is [24Hz] or [23.98Hz], or when [Format] is
[1080/23.98p(59.94i)]
*
1
, it is fixed to [Off] and the display shows
“– – – –”.
• IP video transmission is not possible during transmission of video
via USB.
*
1
It denotes “1080/23.98p over 59.94i”.
USB Auto Active [Off, On]
When [USB Auto Active] is set to [On], if a USB cable is detected
in the Power On state while power is being supplied, [USB Mode]
automatically switches to [On].
USB Auto Standby [Off, On]
Sets Off/On the function for facing the camera to the rear when USB
transmission finishes.
When [USB Auto Standby] is [On], the camera automatically goes to
Standby mode and faces towards the rear.
When [USB Auto Standby] is [On], [Privacy Mode] is [On] and [Power
On Position] behaves like [Standby].
<NOTE>
• Transmission can be started when the camera is recognized as
a USB device even in the Standby mode only when [USB Auto
Standby] is [On].
Return
Return to the previous menu level.

Changing the frequency
When the currently selected frequency is changed in the [System]
screen, the pre-frequency-change confirmation screen appears.
Pre‑frequency‑change confirmation screen
Frequency
Do you want to set Frequency?
( 59.94Hz )
OSD of some outputs
may be hidden.
CANCEL
O.K.
• The frequency to be set is displayed within the parentheses on the
screen.
• When you move the cursor to [O.K.] on the pre-frequency-change
confirmation screen and confirm, the frequency is changed.
<NOTE>
• When using a monitor that does not support
59.94Hz/50Hz/24Hz/23.98Hz frequencies, images may not be
displayed after the frequency is changed. Before changing the
frequency, verify that your monitor supports the frequency.
• When Frequency is changed, the unit restarts.
54 55
Camera menu items (continued)