Panasonic AW-UE50WP - Format and SDI Output Configuration; Changing the Video Format; 3 G SDI Output Settings (AW-UE50)


Changing the format
When the currently selected format is changed in the [System] screen,
the pre-format-change confirmation screen appears.
Pre‑format‑change confirmation screen
Format
Do you want to set Format?
( 1080/23.98p(59.94i) )
OSD of some outputs
may be hidden.
CANCEL
O.K.
• The format to be set is displayed within the parentheses on the
screen.
• When you move the cursor to [O.K.] on the pre-format-change
confirmation screen and confirm, the post-format-change
confirmation screen appears.
Post‑format‑change confirmation screen
Format
Are you O.K.?
No
Yes
• If you move the cursor to [Yes] and confirm, the display returns to
the [System] screen in the post-change format.
• If you move the cursor to [No] and confirm, the display returns to the
[System] screen in the pre-change format.
The same occurs if an operation is not performed within 10 seconds.
• When Format is changed, IP video transmission is stopped.
• When Format is changed, the Format for each output terminal (3G
SDI OUT
*
1
, HDMI) is reset to its predefined value.
*
1
AW-UE50 only
Output 1/5 screen
Output 1/5
3G SDI
Format 1080/59.94p
3G SDI Out LevelA
HDMI
Format 2160/29.97p
Return
3G SDI (AW-UE50 only)
Make the settings for output from the 3G SDI OUT connector.
Format
Set the output format.
The following format settings are possible depending on the [Format]
setting in the [System] screen.
Frequency System Format Format (3G SDI)
59.94Hz 2160/29.97p 1080/29.97p
1080/59.94p 1080/59.94p
1080/59.94i
1080/59.94i 1080/59.94i
1080/29.97p 1080/29.97p
1080/29.97PsF 1080/29.97PsF
1080/23.98p(59.94i)
*
1
1080/23.98p(59.94i)
*
1
720/59.94p 720/59.94p
50Hz 2160/25p 1080/25p
1080/50p 1080/50p
1080/50i
1080/50i 1080/50i
1080/25p 1080/25p
1080/25PsF 1080/25PsF
720/50p 720/50p
24Hz 2160/24p 1080/24p
1080/24p 1080/24p
23.98Hz 2160/23.98p 1080/23.98p
1080/23.98p 1080/23.98p
1080/23.98PsF 1080/23.98PsF
*
1
It denotes “1080/23.98p over 59.94i”.
3G SDI Out [LevelA, LevelB]
When [Format] (3G SDI) is [1080/59.94p] or [1080/50p], select the
format for outputting 3G SDI signals.
LevelA Level A format
LevelB Level B format
<NOTE>
• [3G SDI Out] cannot be changed if [Format] (3G SDI) is other than
[1080/59.94p] or [1080/50p].
56
Camera menu items (continued)