HDMI
Make the settings for output from the HDMI connector.
Format
Set the output format.
The following format settings are possible depending on the [Format]
setting in the [System] screen.
Frequency System Format Format (HDMI)
59.94Hz 2160/29.97p 2160/29.97p
1080/59.94p 1080/59.94p
1080/59.94i 1080/59.94i
1080/29.97p 1080/29.97p
1080/29.97PsF
*
1
1080/29.97p
*
1
1080/23.98p(59.94i)
*
1, 2
1080/23.98p(59.94p)
*
1, 3
720/59.94p 720/59.94p
50Hz 2160/25p 2160/25p
1080/50p 1080/50p
1080/50i 1080/50i
1080/25p 1080/25p
1080/25PsF
*
1
1080/25p
*
1
720/50p 720/50p
24Hz 2160/24p 2160/24p
1080/24p 1080/24p
23.98Hz 2160/23.98p 2160/23.98p
1080/23.98p 1080/23.98p
1080/23.98PsF
*
1
1080/23.98p
*
1
*
1
AW-UE50 only
*
2
It denotes “1080/23.98p over 59.94i”.
*
3
It denotes “1080/23.98p over 59.94p”.
Return
Return to the previous menu level.
Output 2/5 screen
Output 2/5
Bar Camera
Color Bar Type Type2
Tone Normal
Audio Off
Input Type Line
Volume Level CH1 0dB
Volume Level CH2 0dB
Plugin Power Off
Return
Bar [Camera, Colorbar]
Switch between camera images and color bars.
Camera Camera images
Colorbar Color bar
Color Bar Type [Type1, Type2]
Select the type of color bar to display.
Type1:
Type2:
This is only enabled when [Bar] is set to [Colorbar].
Tone [Off, Low, Normal]
Make the settings for the test tone signal (1 kHz) output while the
color bar is displayed.
Off Test tone is not output.
Low Test tone is output at low volume.
Normal Test tone is output at normal volume.
This is only enabled when [Bar] is set to [Colorbar].
Audio [Off, On]
Turn audio input off/on.
Input Type [Mic, Line]
Mic Set the microphone input.
Line Set the line input.
This is only enabled when [Audio] is set to [On].
Volume Level CH1 [–36dB to +12dB]
Set the volume of audio output (CH1).
This is only enabled when [Audio] is set to [On].
Volume Level CH2 [–36dB to +12dB]
Set the volume of audio output (CH2).
This is only enabled when [Audio] is set to [On].
Plugin Power [Off, On]
Turn the plugin power for the audio off/on.
This is only enabled when [Audio] is set to [On].
This is only enabled when [Input Type] is set to [Mic].
Return
Return to the previous menu level.
56 57
Camera menu items (continued)
To Next Page
Loading...
