Power On Position [Standby, Home, Preset]
Select the initial positions for Pan/Tilt/Zoom when the power is turned
on.
Standby Move to the Pan/Tilt/Zoom positions they were in the
last time the camera was switched to Standby mode.
Home Pan/Tilt move to their home positions (front) and
Zoom goes to the Wide end.
Preset Preset playback is performed at the preset position
specified with [Preset Number].
<NOTE>
• When [USB Auto Standby] is [On], this is fixed to [Standby] and the
display shows “– – – –”.
Preset Number [001 to 100]
Specify a number for preset playback when the power turns ON when
[Preset] is set in [Power On Position].
<NOTE>
• If an unregistered preset number is set, preset playback is not
performed and the operation is the same as [Standby].
Return
Return to the previous menu level.
Preset 1/2 screen
Preset 1/2
Preset Speed Unit Speed Table
Preset Speed Table Fast
Preset Speed 20
Preset Scope Mode A
Preset Digital Extender Off
Preset Thumbnail Update On
Preset Name Reset
Return
Preset Speed Unit [Speed Table, Time]
When reproducing the information such as camera direction
registered in the preset memory, you can select whether to specify
the playback time by speed or by time.
Speed Table Specify the speed when playing during preset
playback.
Time Specify the time when playing during preset playback.
Preset Speed Table [Slow, Fast]
Set the preset speed table (Slow, Fast). During preset playback,
presets are performed at [Preset Speed] (1 to 30) values that are
based on the table set here.
This is only enabled when [Preset Speed Unit] is set to [Speed Table].
Preset Speed [1 to 30/1s to 99s]
When [Preset Speed Unit] is [Speed Table]: [1 to 30]
Set the pan/tilt operation speed in 30 steps when playing back the
preset memory.
<NOTE>
• When you set large [Preset Speed] values, the image may sway
when the movement stops.
When [Preset Speed Unit] is [Time]: [1s to 99s]
Set the pan/tilt operation time between 1 and 99 seconds when
playing back the preset memory.
<NOTE>
• Depending on the movement distance of pan/tilt, there may be a
difference compared to the specified time.
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when the contents
of the preset memory are regenerated.
Mode A Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,
white balance adjustment value
Mode B Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C Pan, Tilt, Zoom (including digital zoom), Focus
60
Camera menu items (continued)
To Next Page
Loading...
