Panasonic AW-UE50WP - IP Network and Firmware Version Details; EEPROM and FPGA Firmware Versions; IP Network Configuration

Firmware Version 2/2 screen
Firmware Version 2/2
EEPROM
Main/Network V01.00
FPGA
AVIO V01.00
Return
EEPROM
Main/Network
Display the EEPROM version of the main/network.
FPGA (AW‑UE50 only)
AVIO
Displays the version of the video signal processing section.
Return
Return to the previous menu level.
IP Network screen
IP Network
IP Address
192.168.0.10
Subnet Mask
255.255.255.0
Default Gateway
192.168.0.1
Set Execute
Return
IP Address
Set the IP address for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Subnet Mask
Set the subnet mask for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Default Gateway
Set the default gateway for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Set Execute
Apply the values set in [IP Address], [Subnet Mask], and [Default
Gateway] to this unit.
Return
Return to the previous menu level.
<NOTE>
• The IP Network cannot be changed while the DHCP function is [On].
• If the DHCP function is not to be used, change the setting for
[DHCP] to [Off] in the network settings screen of your web browser.
(→ page 111)
62 63
Camera menu items (continued)