EasyManua.ls Logo

Panasonic AW-UE80WP - Specifications

Panasonic AW-UE80WP
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
Power requirements:
12 V DC
(10.8 V to 13.2 V) (Supplied AC adaptor)
42 V to 57 V DC
(PoE++ power supply)
Current consumption:
3.0 A (Supplied AC adaptor)
1.0 A (PoE++ power supply)
indicates safety information.
GENERAL
Ambient operating temperature:
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature:
–20 °C to 50 °C (–4 °F to 122 °F)
Ambient operating humidity:
20% to 90% (no condensation)
Mass: Approx. 2.0 kg (4.40 lb) (excluding mount bracket)
Dimensions (W × H × D):
170.0 mm×211.0 mm×171.0 mm
(6-11/16 inches × 8-15/16 inches × 6-23/32 inches)
( excluding protrusions, mount bracket)
Finish: AW-UE80WP/AW-UE80WE/AW-UE80WED: White
AW-UE80KP/AW-UE80KE/AW-UE80KED: Black
Controller supported:
AW-RP150, AW-RP60
INPUT
Input connector
DC IN 12 V
G/L IN: BBS (Black Burst Sync), tri-level sync supported
75 Ω terminal (BNC×1)
AUDIO IN: MIC/LINE input compatible (SDI/HDMI/IP)
AAC compatible (compatible with IP only)
ø 3.5 mm stereo mini jack (unbalanced)
During MIC input
Input level: –40 dBV (0 dB=1 V/Pa, 1 kHz)
Plug-in power compatible,
supply voltage: 2.5 V ± 0.5 V
Input impedance:
Approx. 2 kΩ (When plug‑in power is ON)
Approx. 20 kΩ (When plug‑in power is OFF)
During LINE input
Input level: –10 dBV
Input impedance: Approx. 3 kΩ
Input volume variable range:
–36 dB to 12 dB (3 dB step)
Volume settings can be made independently for
left and right.
Embedded audio output level:
–12 dBFS
Sampling frequency:
48 kHz
Quantization bit rate:
24bit (SDI, HDMI), 16bit (IP)
OUTPUT
Video output
HDMI: HDMI 2.0 connector
4:2:2/10bit, 4:2:0/8bit
HDCP is not supported.
Viera Link is not supported.
3G SDI OUT: SMPTE424M/SMPTE292M/75 Ω (BNC×1)
Level-A/Level-B supported
INPUT/OUTPUT
Input/Output connector
LAN: RJ-45
LAN terminal for IP control and video transmission
PoE++ power terminal (IEEE802.3bt compliant)
RS‑422: CONTROL IN RS-422A (RJ-45)
FUNCTIONS AND PERFORMANCE
[Camera unit]
Imaging sensors: 1/2.5-type 4K MOS×1
Lens: Motorized Optical 24× zoom, F1.8 to F4.0
[f=4.12 mm (5/32 inches) to 98.9 mm
(3-29/32 inches); 35 mm (1-3/8 inches) equivalent:
25.0 mm (31/32 inches) to 600.0 mm (23-5/8 inches)]
i.Zoom (UHD: 28×, FHD: 36×)
Conversion lens: Not supported
Angle of view range:
Horizontal angle of view: 74.1° (wide) to 3.3° (tele)
Vertical angle of view: 46.0° (wide) to 1.9° (tele)
Diagonal angle of view: 81.8° (wide) to 3.8° (tele)
Optical filter: Through, 1/4, 1/16, 1/64, IR through
(IR through is used as “Night mode”)
Focus: Switching between auto and manual
Focus distance: Entire zooming range: 1200 mm (3.9 ft)
Wide end: 100 mm (0.33 ft)
Color separation optical system:
1MOS
Minimum illumination:
3 lx (conditions: F1.8, 59.94p, 50 IRE, 42 dB, without
accumulation)
Horizontal resolution:
1500 TV lines Typ (Center area, in UHD mode, at the
Wide end)
1000 TV lines Typ (Center area, in FHD mode, at the
Wide end)
Gain selection: Auto, 0 dB to 36 dB (1 dB steps)
Super Gain function installed: 37 dB to 42 dB
Frame mix: Auto, 0 dB, 6 dB, 12 dB, 18 dB, 24 dB
This cannot be configured when the format is
2160/29.97p, 2160/23.98p, 2160/24p, 2160/25p,
1080/29.97p, 1080/23.98p(59.94i), 1080/23.98p,
1080/24p, 1080/29.97PsF, 1080/23.98PsF,
1080/25p, 1080/25PsF.
162

Table of Contents

Related product manuals