Auto F.Mix Max Gain [0dB, 6dB, 12dB, 18dB]
Sets the maximum amount of frames that can be added when [Frame
Mix] is running in [Auto] mode.
When frame addition is performed in [Auto] mode, it will appear as if
the images are missing some frames.
Back Light COMP. [Off, On]
Turn the backlight compensation function On/Off.
The camera compensates to make the overall screen brighter to
reduce the effect of the subject darkening due to backlight.
This is enabled when the following automatic exposure compensation
functions are set to either [Auto] or [ELC].
• When [Iris Mode] is set to [Auto]
• When [Shutter Mode] is set to [ELC]
• When [Gain] is set to [Auto]
• When [Frame Mix] is set to [Auto]
<NOTE>
• When [Spot Light COMP.] is set to [On], [Back Light COMP.] is [Off].
Spot Light COMP. [Off, On]
Turn the spotlight compensation function On/Off.
The camera compensates to shoot bright subjects cleanly when
something like a spotlight makes the center extremely bright.
This is enabled when the following automatic exposure compensation
functions are set to either [Auto] or [ELC].
• When [Iris Mode] is set to [Auto]
• When [Shutter Mode] is set to [ELC]
• When [Gain] is set to [Auto]
• When [Frame Mix] is set to [Auto]
<NOTE>
• When [Back Light COMP.] is set to [On], [Spot Light COMP.] is [Off].
Flicker Suppression [Off, On]
Turn the flicker suppression function On/Off.
The light that is generated under discharge tubes (such as fluorescent
lights) changes cyclically and produces a flickering effect, and this
function can reduce these issues that produce horizontal stripes in
colors.
Brightness 3/3 screen
Brightness 3/3
ND Filter Through
Day/Night Day
Return
ND Filter [Through, 1/4, 1/16, 1/64, Auto]
Set the transmittance of the lens' built-in ND (neutral density) filter.
The filter switches when the setting is fixed.
Through Do not set ND filter.
1/4 Set ND filter transmittance to 1/4.
1/16 Set ND filter transmittance to 1/16.
1/64 Set ND filter transmittance to 1/64.
Auto The transmittance of the ND filter is automatically adjusted
to one of [Through], [1/4], [1/16], or [1/64].
This can only be set when [Scene] is [Full Auto].
Day/Night [Day, Night]
Switch between standard shooting and night-vision shooting (shooting
with infrared light).
Day Standard shooting (day mode)
Night Night-vision shooting (night mode)
<NOTE>
• In night mode, video output will be in black and white. In addition,
the iris will be forcibly opened.
• White balance adjustment is not possible in night mode.
• ND filter switching is not possible in night mode.
• [Pedestal] cannot be performed properly in night mode.
Return
Return to the previous menu level.
48 49
Camera menu items (continued)
To Next Page
Loading...
