Panasonic AWRP120 - Page 57

57
Memory card
Indication Description
NO CARD!
No card is inserted
INITIALIZING
NOT REMOVE CARD
Initializing
SAVING
NOT REMOVE CARD
Saving data to the memory card
Do not remove the memory card
LOADING
NOT REMOVE CARD
Reading data from the memory card
Do not remove the memory card
COMPLETE
Initializing, saving, or loading is
completed
WRITE PROTECTED!
The memory card is write protected
OVER 99FILES!
Saving is not possible because
there are already 99 files
INSUFFICIENT
CAPACITY!
Saving is not possible because
there is insufficient free space in the
memory card
LOAD ERROR!
A file cannot be read by the unit
or selected remote camera The
following files are incompatible
 A file saved with a different model
than the currently selected remote
camera
 A file containing corrupted data
Setup software
Indication Description
Not connected
The unit and personal computer are
not connected
Already assigned
The image input of the selected
switcher is already selected for
another camera number
Take care not to make a duplicate
selection
IP(############)
duplicate
The entered connection destination
IP address (############) is a
duplicate of either the IP address of
the unit or a connection destination
IP address for another camera
number or the switcher
Unavailable network
setting
The entered IP address and port
number cannot be set
Set correct values
⇒ “Network settings of the unit” in
<Basics> (page 27)
⇒ “Settings for connecting with the
remote cameras and switcher” in
<Basics> (page 29)
Please reboot
AW‑RP120
The unit needs to be rebooted
Turn the unit's power off and then
back on
Old User Name or Old
Password is incorrect
The entered user name or password
does not match the value set on
the unit
Entered information is
incorrect Enter again
The entered information includes
characters that cannot be used on
the unit
Complete the “Old User
Name” field
Enter the user name in the “Old
User Name” box
Complete the “New User
Name” field
Enter the user name in the “New
User Name” box
Complete the “Old
Password” field
Enter the password in the “Old
Password” box
Complete the “New
Password” field
Enter the password in the “New
Password” box
Complete the “Retype
New Password” field
Enter the password in the “Retype
New Password” box
Password entered in the
“Retype New Password”
field is incorrect
The password entered in the
“Retype New Password” box does
not match the one entered in the
“New Password” box
 A number is displayed instead of “#”
Messages (continued)