Panasonic BL-C111A - Network Camera - Pan - Page 42

42
BL-C111A /BL-C131A
9.1.2. How To Remove Sub Board
• 1-4 are the same as 9.1.1. How To Remove Main Board and I/O Board .
5. Remove six Screws (B).
6. Remove Eye Block, Pan Motor Unit, Pan Motor Angle, Connect Angle
and Washer.
7. Remove two Screws (B).
8. Remove Board support and Cabinet Cap from Cabinet Body.
9. Remove two Screws (B).
10. Remove Sub Flat Cable from Sub Board.