Panasonic BT-LH2170 - Main Menu - Display Setup; WFM;Vector Display Configuration; Time Code and Closed Caption Settings

46
Main Menu (continued)
47
DISPLAY SETUP
Underlined values indicate factory defaults.
Submenu Setting Description
WFM/VECTOR
OFF
WFM Y
WFM R
WFM G
WFM B
VECTOR
Switches between WFM/VECTOR waveform and vector display.
[WFM Y] - [WFM B] Displays waveforms.
[VECTOR] Displays vector waveforms.
*
1
POSITION RT
RB
LB
LT
Selects the position for the "WFM/VECTOR" waveform display.
*
1
[RT] Right Top
[RB] Right Bottom
[LB] Left Bottom
[LT] Left Top
VECTOR MODE
×1
×2S
×2
×4
×8
Enlarges vector waveforms.
*
1
[×1] 1x
[×2S] At 1x scale display only waveforms are enlarged to 2x.
[×2] 2x
[×4] 4x
[×8] 8x
VECTOR SCALE
75%
100%
Determines the scale of vector waveform.
[75%] Displays it at 75 % scale.
[100%] Displays it at 100 % scale.
TIME CODE
OFF
ON
Selects whether to enable or disable time code display
*
2
POSITION TOP
RIGHT
CENTER
LEFT
Selects position of time code display.
*
2
[TOP] Top center of screen
[RIGHT] Bottom right of screen
[CENTER] Bottom center of screen
[LEFT] Bottom left of screen
FONT SIZE
SMALL
LARGE
Selects font size of time code display.
[SMALL] Menu font size
[LARGE] Twice the height and width of menu font size
MODE SELECT
LTC
VITC
LUB
VUB
LTC+LUB
VITC+VUB
Selects time code display mode.
[LTC] Displays linear time code.
[VITC] Displays vertical interval time code.
[LUB] Displays user bits included in LTC.
[VUB] Displays user bits included in VITC.
[LTC+LUB] Displays [LTC] and [LUB] on two consecutive lines.
[VITC+VUB] Displays [VITC] and [VUB] on two consecutive lines.
CLOSED CAPTION
OFF
ON
Selects whether to enable or disable closed caption display.
*
3
CC TYPE CEA-608 (ANC)
CEA-608 (VBI)
CEA-608 (708)
CEA-708
OP-42
OP-47
Selects the closed caption display mode.
[CEA-608 (ANC)] Displays data compliant with CEA-608 (ANC).
[CEA-608 (VBI)] Displays data compliant with CEA-608 (VBI).
[CEA-608 (708)] Displays CEA-608 standard data transmitted according to the
CEA-708 standard.
[CEA-708] Displays data compliant with CEA-708.
[OP-42] Displays OP-42 data.
[OP-47] Displays OP-47 data.
CAPTION CHANNEL
CC1
CC2
CC3
CC4
Selects the closed caption display channel for CEA-608.
*
1
Opens the vector display during SDI signal input.
*
2
When the TWO WINDOW function is operating, only SDI1 signals support time code display. As a result, the time code is displayed
at the bottom left of the screen.
*
3
A bright line appears on line 21 when signal input is set to [ON] during video and underscan is enabled.