Panasonic BT-LH2170 - 3 D Assist Mode - Overlay Settings; Overlay Display Options; Marker Position and Width Settings

54
3D Assist Mode (continued)
55
Underlined values indicate factory defaults.
Menu Setting Description
OVERLAY
STANDARD
GLAY
COLOR
Selects overlay or gray display (displays image differences that emphasize the
parallax portion).
[STANDARD] Overlay display
[GLAY] Gray display (differences display)
[COLOR] Color indicated (differences display)
Edge of SDI1 (L) side image Red
Edge of SDI2 (R) side image Green
• When [COLOR] is selected, [L: RED R: GREEN] is displayed in the menu.
MKR POSI
0 to 56 (MKR WIDTH 3%
setting)
0 to 37 (MKR WIDTH 2%
setting)
0 to 18 (MKR WIDTH 1%
setting)
(Factory default setting: 0)
Shifts the vertical line marker in the horizontal direction.
MKR WIDTH
3%
2%
1%
Selects the interval of a vertical line marker.
[3%] Shown at 3 % intervals across the horizontal image width
[2%] Shown at 2 % intervals across the horizontal image width
[1%] Shown at 1 % intervals across the horizontal image width
• Changing [MKR WIDTH] automatically changes the [MKR POSI] setting that is
tied to it.