65
REMOTE Specifications (continued)
No Send commands Command name Data
Return
40 MWC:<data> TWO WINDOW 0:SINGLE 1:TWO M/M MWC
41 DWM:<data> WFM/VECTOR 0:OFF 1:WFM Y ON 2:WFM R ON 3:WFM G ON
4:WFM B ON 5:VECTOR ON
DWM
42 VWB:RGN<data> WHITE BALANCE
(R GAIN)
0 to 1023 RED GAIN setting VWB
43 VWB:GGN<data> WHITE BALANCE
(G GAIN)
0 to 1023 GREEN GAIN setting VWB
44 VWB:BGN<data> WHITE BALANCE
(B GAIN)
0 to 1023 BLUE GAIN setting VWB
45 VWB:RBS<data> WHITE BALANCE
(R BIAS)
0 to 1023 RED BIAS setting -512 to 511 VWB
46 VWB:GBS<data> WHITE BALANCE
(G BIAS)
0 to 1023 GREEN BIAS setting-512 to 511 VWB
47 VWB:BBS<data> WHITE BALANCE
(B BIAS)
0 to 1023 BLUE BIAS setting-512 to 511 VWB
48 MPP:<data> PIXEL TO PIXEL 0:OFF 1:ON MPP
49 DPO:<data> PIXEL POSITION 0:CENTER 1:LEFT 2:RIGHT DPO
50 MFR:<data> FOCUS IN RED 0:OFF 1:ON MFR
51 DLM:<data> LEVEL METER 0:OFF 1:2CH 2:4CH 3:8CH DLM
52 DTM:<data> TIME CODE 0:OFF 1:LTC 2:VITC 3:LUB 4:VUB 5:LTC+LUB
6:VITC+VUB
DTM
53
MCC:<data>
*
1
CLOSED CAPTION 00:OFF 01:CC1(CEA-608(VBI))
02:CC2(CEA-608(VBI)) 03:CC3(CEA-608(VBI))
04:CC4(CEA-608(VBI)) 05:SRV1(CEA-708)
06:SRV2(CEA-708) 07:SRV3(CEA-708)
08:SRV4(CEA-708) 09:SRV5(CEA-708)
10:SRV6(CEA-708) 11:OP-42 12:OP-47
13:CC1(CEA-608(ANC)) 14:CC2(CEA-608(ANC))
15:CC3(CEA-608(ANC)) 16:CC4(CEA-608(ANC))
17:CC1(CEA-608(708)) 18:CC2(CEA-608(708))
19:CC3(CEA-608(708)) 20:CC4(CEA-608(708))
MCC
54 MAN:<data> ANAMO 0:OFF 1:ON MAN
55 OYM:<data> Y MAP 0:OFF 1:ON OYM
56
OPA:<data>
*
2
PICTURE ASSIST 0:OFF 1:ON OPA
57 ORC:<data> R COLOR 0:OFF 1:ON ORC
58 OGC:<data> G COLOR 0:OFF 1:ON OGC
59 OBC:<data> B COLOR 0:OFF 1:ON OBC
60 DIS:WVP<data> WFM/VECTOR POSITION 0:RT 1:RB 2:LB 3:LT DIS
61 DIS:VMO<data> VECTOR MODE 0:x1 1:x2S 2:x2 3:x4 4:x8 DIS
62 DIS:VSC<data> VECTOR SCALE 0:100 % 1:75 % DIS
63 DIS:TMP<data> TIMECODE POSITION 0:TOP 1:RIGHT 2:CENTER 3: LEFT DIS
64 DIS:TFS<data> TIMECODE FONT SIZE 0:LARGE 1:SMALL DIS
65 DIS:IMD<data> IN MONITOR DISPLAY 0:OFF 1:ON DIS
66 DIS:IMP<data> IN MONITOR DISPLAY
POSITION
0:TOP 1:BOTTOM DIS
67 DIS:IMC<data> IN MONITOR DISPLAY
CHAR. COLOR
0: CMD (RS-485 setting) 1: WHITE 2: BLUE
3:GREEN 4:YELLOW 5:CYAN 6:RED
7:GRAY 8:MAGENTA
DIS
68 DIS:IMV<data> IN MONITOR DISPLAY
VERSION
0:Ver3.1 1:Ver4.0 DIS
69 AUD:IIS<data> INPUT SELECT 0:AUTO 1:ANALOG AUD
70 AUD:GSL<data> GROUP SELECT 0:1 to 8 1:9 to 16 AUD
71 AUD:ISL<data> SELECT L 0:1ch/9ch 1:2ch/10ch 2:3ch/11ch 3:4ch/12ch
4:5ch/13ch 5:6ch/14ch 6:7ch/15ch 7:8ch/16ch
AUD
*
1
Configures settings for the [CLOSED CAPTION], [CC TYPE], [CAPTION CHANNEL], [CAPTION SERVICE] menu items under
[DISPLAY SETUP] simultaneously.
*
2
In 2-screen ([SUB WINDOW], [TWO WINDOW], [PICTURE ASSIST]) commands, a command input when another mode goes on
changes priority to the input mode.
(A switch to SINGLE, switches the monitor to single screen display.)
To Next Page
Loading...
