Panasonic BT-LH910G - Display Setup

50
Main Menu
(continued)
DISPLAY SETUP
The underlined values are factory preset setting values.
Sub menu Settings Description
WFM/VECTOR
OFF
WFM Y
WFM R
WFM G
WFM B
VECTOR
Switches between “WFM/VECTOR” waveform and vector display.
<WFM Y> - <WFM B> Displays waveforms.
<VECTOR> Displays vector waveforms.
*
1
POSITION LB
RB
RT
LT
Selects the position for the “WFM/VECTOR” waveform display.
*
1
<LB> Left Bottom
<RB> Right Bottom
<RT> Right Top
<LT> Left Top
VECTOR MODE
×8
×4
×2
×2S
×1
Enlarges vector waveforms.
*
1
<×8>  8×
<×4>  4×
<×2>  2×
<×2S> Stateinwhichdisplayedatscaleof1x,andonly
waveforms enlarged to 2 x.
<×1>  1×
VECTOR SCALE
100%
75%
Determines the scale of vector waveform.
<100%> Displays it at 100 % scale.
<75%> Displays it at 75 % scale.
TIME CODE
OFF
ON
Turns the time code display on and off.
MODE SELECT
LTC
VITC
LUB
VUB
Selects time code display mode.
<LTC> Displays linear time code (LTC).
<VITC> Displays vertical interval time code (VITC).
<LUB> Displays user bits included in LTC.
<VUB> Displays user bits included in VITC.
CLOSED CAPTION
OFF
ON
Turns closed caption display on and off.
*
2
CC TYPE CEA-608
CEA-708
Selects the closed caption display mode.
<CEA-608> Displays data compliant with CEA-608.
<CEA-708> Displays data compliant with CEA-708.
CAPTION
CHANNEL
CC4
CC3
CC2
CC1
Selects the closed caption display channel for when CEA-608.
CAPTION
SERVICE
SRV6
SRV5
SRV4
SRV3
SRV2
SRV1
Selects the closed caption display service for when CEA-708.
Opens the vector display during SDI signal input.
*
1
Available during VIDEO input. Closed captions appear as bright lines on line 21 when closed caption is
*
2
set to ON and underscan is also on.