Panasonic CF-20 - Page 30

30
Useful Information
Installing Software
14 <For MUI OS model>
Click [Next].
Iftheoptionisdisplayed,selectthesettingandclick[Next].
l
 [ReinstallwithHDDrecoverypartition.]

Standardrecoverymethod.

YoucanuserecoveryfromRecoveryPartition.
l
 [ReinstallwithoutHDDrecoverypartition.]

Increaseusabledisksize.

YoucanNOTuserecoveryfromRecoveryPartition.

Whenthisoptionisselected,youcannolongercreateRecoveryDisc(s)afterthere-
coveryoperation.
CAUTION
l
 Carefullychooseaboveitembecauseyoucannotchangeitlater.
15 Click [Next].
Iftheoptionisdisplayed,selectthesettingandclick[Next].
l
 [InitializeandreinstallWindowstothewholeDisk]

SelectthisoptionwhenyouwanttoinstallWindowstothefactorydefault.Afterinstal-
lation,youcancreateanewpartition.Forhowtocreateanewpartition,referto“To
changethepartitionstructure”(

page19).
l
 [ReinstallWindowstotheOSrelatedpartitions]
*2

Selectthisoptionwhentheashmemoryhasalreadybeendividedintoseveralparti-
tionsandyouwanttokeepthepartitionstructure.Forhowtocreateanewpartition,
referto“Tochangethepartitionstructure”(

page19).
*2
ThisdoesnotappearifWindowscannotbeinstalledtotherecoverypartitionandtheareaus-
ablebyWindows.
16 Click [Recovery ALL Partitions.].
17
Click [Remain Recovery Partition.].
Follow the on-screen instructions.
18
At the conrmation message, click [YES].
Installationstartsaccordingtotheinstructionsonthescreen.(Itwilltakeapproximately30
-45minutes.)
l
 Donotinterruptinstallation,forexamplebyturningoffthecomputerorpressing
Ctrl
+
Alt
+
Del
.
OtherwiseinstallationmaybecomeunavailableasWindowsmaynotstartuporthe
datamaybecorrupted.
19 When Ending process screen is displayed, remove the Recovery Disc
and DVD drive or commercially available optical drive and then click
[Reboot] / [OK].
Followtheon-screeninstructions.
20
On the “Finish Recovery Process.” screen, click [Shutdown.].
21 Turn on the computer.
22 Perform the “Setup Windows” (

page 16).
23 Start the Setup Utility and change the settings as necessary.